We've detected you are coming from a location where we have a regional site.
Please choose one of the following sites:

Link connector exchange

A link connecter exchange requires a total disassembly of the digital back. The moveable joint and the internal wiring of the connecter is replaced.

Before re-assembly of the digital back, additional hardware modifications are conducted if necessary to ensure the best possible performance for the specific product. After a CCD-sensor calibration the CCD and the IR-filter is cleaned, and the filter is re-mounted (or replaced if it has any scratches).

For further details, please refer to the description of “CCD cleaning”.

After passing all tests, the back is ready to leave the workshop again.